Enhanced electrical and photoluminescence properties of BiSbO4-doped CaCu3Ti4O12 ceramics by modifying grain boundary response

CaCu₃Ti₄O₁₂-xwt%BiSbO₄ ceramics (CCTO-xwt%BSO, x = 0, 1, 2, 3) were prepared by solid-state reaction method. The microstructure, dielectric properties, varistor properties, photoluminescence properties of CCTO-xwt%BSO ceramics were studied in this work. Results showed that all samples formed CaCu₃Ti₄O₁₂ (CCTO) single phase. Doping BiSbO₄ (BSO) restrained the abnormal grain growth and increased the grain boundary density of ceramics. The introduction of BSO led to the increase of the grain boundary resistance, reducing the dielectric loss and enhancing the temperature stability of dielectric properties. The nonlinear electrical characteristics are enhanced with proper concentration of BSO. And the improved varistor performance with breakdown electric field of ～3.98–34.6 and nonlinear coefficient of ～1.49–2.96 are obtained for CCTO-xwt%BSO samples. In addition, the photoluminescent emission of the samples is enhanced with the addition of appropriate equivalent BSO, showing the potential applications in novel devices with photoluminescent/electrical multifunctional properties.     

掘进工作面瓦斯分级治理的技术研究

余吾煤业公司作为高瓦斯矿井,瓦斯吸附能力强,属低透气性难抽放煤层。矿井目前处于新旧采区重叠期、瓦斯含量双向变化重叠期,需要立足当前、分类施策,提升采掘效率。为进一步规范掘进工作面瓦斯治理,建立规范的瓦斯治理程序,介绍了掘进工作面瓦斯分级治理相关措施,确保掘进工作面安全生产有序进行。     

基于智能控制的煤层气抽采监测系统的应用研究

提出了一种基于智能控制的煤层气抽采监测系统。该系统以可编程逻辑控制器为控制中心,通过监测传感器实现对煤层气抽采时的井底流压力、温度等的连续性监测,实现对抽采设备运行转速的调整。实际表明该控制系统能将井底流压力变化范围控制在0.4%范围内,有效提升了煤层气采集的控制精度和采集速度。     

Enhancing stability region of time‐delayed smart power grids by non‐integer controllers

In this study, the impacts of non‐integer order controller on the stable parameter space of the microgrid (MG) frequency control system with fixed communication time delay are investigated and discussed with the help of the stability boundary locus (SBL) method. This study proposes a non‐integer order controller for the load frequency control (LFC) of the MG systems. To that end, the load frequency model of the MG is formulated and then the characteristic equations of this model are obtained. Then, with the help of this characteristic equation, the stable parameter space of the non‐integer controller is determined with regard to different time delay (τ ) and fractional integral order values (α ) using the SBL method. In order to show the accuracy of the obtained stable parameter space, time domain and generalized modified Mikhailov (GMM) criterion studies are carried out for different values of (τ ) and (α ). According to the results obtained, the areas of stable parameter space according to different α values and τ = 1.6 are calculated as 444.8860 for α = 0.4 , 342.9728 for α = 0.7 , 259.3578 for α = 1 , 216.2541 for α = 1.3 and 159.6826 for α = 1.6 . In addition, the areas of stable parameter space according to different τ values and α = 1.4 are calculated as 784.5222 for τ = 1 , 106.3219 for τ = 2 , 29.6959 for τ = 3 and 11.5946 for τ = 4 . Despite the extreme variability arising from nature of resources that make up the MG, the designed non integer order controller with the values selected within the stable parameter space stably carries out LFC control of the MG.     

Comparison of the dynamic responses of monopiles and gravity base foundations for offshore wind turbines in sand using centrifuge modelling

Monopiles and gravity base foundations (GBF) are two of the most commonly used foundations for offshore wind turbines. As resonance can cause damage and even failure of wind turbines, understanding the difference between the dynamic responses of monopiles and GBFs under free vibration is important. However there is little experimental data regarding their natural frequency, especially from model tests carried out at correct stress levels. This paper presents the results of novel monopile and GBF tests using a centrifuge to directly determine the natural frequency (f_n) of the foundation-soil system. The natural frequencies of wind turbine monopiles and GBFs in centrifuge models were measured during harmonic loading using a piezo-actuator, with the results confirming that soil-structure interaction must be considered to obtain the system’s natural frequency as this frequency reduces substantially from fixed-base values. These results will contribute in preventing resonance induced damage in wind-turbines.     

New sinusoidal oscillator configurations using operational transresistance amplifier

The objective of this brief is to introduce four new structures of electronically tunable sinusoidal oscillators (SOs) designed using operational transresistance amplifier (OTRA). Each of the proposed SO consists of forward path derived from a generic structure along with one/two OTRA-based resistive gain stages or differentiator in its feedback path. All the proposed SOs enjoy independent tuning of the frequency of oscillation (FO) through resistors without affecting the condition of oscillation (CO). Further, all topologies are found to exhibit low f_o sensitivities at all frequencies with respect to circuit parameters, and the second topology is capable of achieving very low frequencies (VLFs) using less RC component spread and provides linear tuning too. The fourth circuit provides quadrature output. The proposed SOs have been successfully implemented and verified in 180-nm CMOS technology node using ADE (analog design environment) tool Cadence Virtuoso. Both prelayout and postlayout simulation results have been included. To assess the oscillator prefabrication performances, Monte Carlo and process-voltage-temperature (PVT) analyses have been performed. The total harmonic distortion (THD) is observed to be less than 3.5%.     

基于 GA-SVM 算法的通信网络入侵信号自动识别技术

针对当前通信系统入侵行为自动识别技术存在入侵信号样本识别成功率较低、误识别率和漏识别率较高的问题,提出基于 GA-SVM 算法的通信网络入侵信号自动识别技术。利用混沌原理提取通信网络入侵的非平稳信号时域特征,并凭借自回归模型提取对应频域特征,捕捉邻域入侵信号间的非线性时空动作频率,评价相邻行为间的状态关联性,预测入侵信号后续行为,完成入侵信号的识别。实验表明,所提方法识别精度高、误识别率较低,漏识别率非常低,具有可应用于实际的理论价值。     

An investigation of the elastic properties of viscoelastic clusters of particles: A comparison between two methods

Most industrial process lines involve mixing complex dispersions, which can include non-Newtonian liquids and viscoelastic particles. Knowledge of the parameters of these components may provide a key for understanding how dispersions are formed and how equipment should be designed. One parameter is the shear modulus, which describes the ability of particles to resist mechanical stresses. This parameter may play the main role in the mixing process, when a dispersion is formed by the mechanical influence of a rotor (slice or shear in a rotor-stator mixer). In this work, two methods were chosen for measuring the shear modulus: the evaluation method, based on the Warner-Bratzler cut test, and the oscillatory method. Both methods were used for measuring viscoelastic clusters of particles, and the results were adjusted for the purposes of the comparison. The comparison shows that the shear modulus values obtained from Warner-Bratzler are higher than the values obtained from the oscillatory test for the same conditions. This difference can be explained by differences in the mechanical processes during the experiments.     

Nb2O5-doped NiZnCo ferrite ceramics with ultra-high magnetic quality factor and low coercivity for high-frequency electronic devices

This work investigates the influence of niobium pentoxide (Nb₂O₅) as dopant, on the structural, magnetic, and dielectric properties of NiZnCo ferrites. The results showed that Nb₂O₅ was an effective dopant, and the Nb⁵⁺ ions entered the B site to replace Fe³⁺ ions, which altered the electromagnetic properties of the NiZnCo ferrite. In particular, the coercivity (H_c) was 20～24 Oe, and the magnetic quality factor (Q), was more than 200 at x = 0 and x = 0.1 wt%, which is 4～5 times higher than that of NiZn and NiCuZn ferrites. Excellent electromagnetic properties were obtained for 0.1 wt% Nb₂O₅-doped NiZnCo ferrite, i.e., M_s = 88.3 emu/g, H_c =20.4 Oe, ρ = 2.4 × 10⁵ Ω m and Q = 202 @20 MHz. These excellent electromagnetic properties of Nb₂O₅-doped NiZnCo ferrites could be potentially applied to resonators and capacitors at high frequency.     

Advances in radio frequency pasteurisation equipment for liquid foods: a review

Radiofrequency (RF) heating is an alternative emerging technology to conventional thermal methods; it has been employed for food pasteurisation, providing fast and volumetric heating. However, non-uniformity in the heating pattern has been reported. RF pasteurisation has been studied in different liquid foods. This review provides information about the RF heating mechanism and equipment used to pasteurise liquid food to control deteriorative or pathogen micro-organisms and the effect of the RF treatment on the quality of liquid foods. Developing an effective RF pasteurisation for liquid foods requires knowing the food dielectric properties, which determine the heating uniformity, temperature distribution and heating rate. The efficiency of continuous RF heating systems could depend on the fluid rate, resident time and absorbed power. RF heating can pasteurise liquid food, decrease microbial population and preserve the product's nutritional and physicochemical quality.